July/2019 Braindump2go New 70-735 Exam Dumps with PDF and VCE New Updated! Following are some new 70-735 Exam Questions:
1.|2019 Latest Braindump2go 70-735 Exam Dumps (PDF & VCE) Instamnt Download:
https://www.braindump2go.com/70-735.html
2.|2019 Latest Braindump2go 70-735 Exam Questions & Answers Instamnt Download:
https://drive.google.com/drive/folders/0B75b5xYLjSSNZDBFeXJYTkxyQTQ?usp=sharing
Latest Question
You have a computer named Computer1.
You deploy an image of Windows 10 to Computer1.
You start Computer1 in audit mode, and then you install several device drivers.
You need to capture an image of Computer1.
Which tool should you use?
A. Windows System Image Manager (Windows SIM)
B. dism.exe
C. Express Deployment Tool (EDT) for Windows 10
D. scanstate.exe
Answer: B
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/capture-images-of-hard-disk-partitions-using-dism
Latest Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of windows 10.
You need to specify how the hard disk will be partitioned during the Windows 10 installation.
What should you do?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: D
Explanation:
https://technet.microsoft.com/en-us/library/cc765950(v=ws.10).aspx
Latest Question
You have a computer that runs Window 10. The computer starts in UEFI mode and has a 64-bit processor.
You insert a USB key in the computer. The USB key has a drive letter of F.
You need to ensure that you can start the computer by using Windows Preinstallation Environment (Windows PE) from the USB key.
Which two commands should you run? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. makewinpemedia.cmd /UFD C:\WinPE F:
B. makewinpemedia.cmd /ISO C:\WinPE F:
C. copype.cmd amd64 C:\WinPE
D. dism.exe /Export-Image /SourceImageFile:C\WinPE\boot.wim /SourceIndex:1 /DestinationImageFile:F\boot.wim
E. copype.cmd x86 C:\WinPE
Answer: AC
Latest Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You install Windows 10 on several devices.
You need to add a trusted root certification to the devices. You must achieve the goal with out reinstalling Windows 10.
What should you do?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: F
Explanation:
https://docs.microsoft.com/it-it/windows/configuration/provisioning-packages/provisioning-packages
Latest Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a custom image of Windows 10.
You need to deploy the image to a computer.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: F
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/apply-images-using-dism
Latest Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You create the working directories for the customization of a Windows Preinstallation Environment (Windows PE) image.
You need to add scripting support to windows PE.
What should you do first?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: B
Latest Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders.
Some of the update packages contain dependencies to the other update packages.
You are unaware of the specific dependencies.
You need to add all the update packages to the image in the correct order.
Solution: You copy all the update to the same folder. You run dism.exe /Add-Package once and specify the /PackagePath parameter once.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/servicing-the-image-withwindows-updates-sxs
Latest Question
You have an image of Windows 10.
You plan to deploy the image to a new computer.
You run sysprep.exe /generalize /oobe /shutdown, and then you capture the image.
You deploy the image to the computer.
You add an application and a driver to the online image.
You need to prepare the computer for the end user.
Which command should you run?
A. sysprep.exe /oobe
B. sysprep.exe /generalize /audit
C. dism.exe /Apply-Image
D. imagex.exe /capture
Answer: A
Latest Question
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question Is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 for a new desktop computer model.
The computer uses specific out-of-box device drivers stored in the INF format.
You need to update the drivers by using an answer file.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: G
Explanation:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/dism-unattended-servicingcommand-line-options
Latest Question
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders.
Some of the update packages contain dependencies to the other update packages.
You are unaware of the specific dependencies.
You need to add all the update packages to the image in the correct order.
Solution: You run dism.exe /Get-Packages, and then you pipe the output to dism.exe /Add-Package.
Does this meet the goal?
A. Yes
B. No
Answer: B
Latest Question
You plan to deploy a Windows Preinstallation Environment (Windows PE) image.
Your company uses a graphical application to help installers choose an installation method for Windows 10.
The application must be started by using the following command.
installerGui.bat /Full /Interactive
You need to configure Windows PE to run the graphical application during startup.
Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Create a [boot loader] section in the INI file and add the command.
B. Create a Boot.ini file in the root folder of the image.
C. Create a Winpeshl.ini file in the \Windows\System32 folder of the image.
D. Create a [LaunchApp] section in the INI file and add the command.
E. Create a [LaunchApps] section in the INI file and add the command.
Answer: CE
Explanation:
https://technet.microsoft.com/en-us/library/hh825046.aspx
!!!RECOMMEND!!!
1.|2019 Latest Braindump2go 70-735 Exam Dumps (PDF & VCE) Instamnt Download:
https://www.braindump2go.com/70-735.html
2.|2019 Latest Braindump2go 70-735 Study Guide Video Instant Download:
https://youtu.be/Uy5yry-97Sg